At present, pretty much all new laptops or computers contain SSD drives as opposed to HDD drives. You can find superlatives about them all over the professional press – that they are a lot faster and function far better and that they are really the future of desktop computer and laptop computer generation.

However, how do SSDs perform in the hosting community? Are they responsible enough to substitute the proved HDDs? At Asheville Micro Services, we’ll aid you much better be aware of the dissimilarities among an SSD as well as an HDD and judge the one that best fits you needs.

1. Access Time

Image

SSD drives give a brand new & revolutionary way of data storage according to the utilization of electronic interfaces in place of any sort of moving components and spinning disks. This brand–new technology is faster, allowing for a 0.1 millisecond data access time.

Image

The technology driving HDD drives times all the way to 1954. And even though it’s been substantially processed over time, it’s nevertheless no match for the revolutionary concept driving SSD drives. Utilizing today’s HDD drives, the very best file access rate you can attain can vary somewhere between 5 and 8 milliseconds.

2. Random I/O Performance

Image

The random I/O performance is extremely important for the operation of any data file storage device. We have conducted extensive assessments and have determined an SSD can deal with a minimum of 6000 IO’s per second.

Image

With a HDD drive, the I/O performance progressively enhances the more you apply the disk drive. However, right after it gets to a particular cap, it can’t get swifter. And because of the now–old concept, that I/O limit is noticeably lower than what you can find with a SSD.

HDD are only able to go so far as 400 IO’s per second.

3. Reliability

Image

SSD drives don’t have any sort of moving components, meaning that there’s a lesser amount of machinery inside them. And the fewer physically moving parts you can find, the fewer the prospect of failing will be.

The normal rate of failure of any SSD drive is 0.5%.

Image

For an HDD drive to function, it must spin a pair of metal disks at a minimum of 7200 rpm, retaining them magnetically stabilized in the air. They have a wide range of moving components, motors, magnets and also other devices loaded in a tiny place. Therefore it’s obvious why the standard rate of failure of an HDD drive ranges between 2% and 5%.

4. Energy Conservation

Image

SSDs are lacking moving parts and require hardly any chilling power. In addition, they demand very little power to function – trials have indicated that they’ll be operated by a normal AA battery.

In general, SSDs consume somewhere between 2 and 5 watts.

Image

From the moment they were created, HDDs have invariably been very power–ravenous devices. So when you have a server with many HDD drives, this tends to boost the regular monthly electric bill.

Typically, HDDs consume somewhere between 6 and 15 watts.

5. CPU Power

Image

The swifter the data file access speed is, the faster the data requests will be processed. As a result the CPU will not have to reserve assets looking forward to the SSD to reply back.

The average I/O wait for SSD drives is barely 1%.

Image

When compared with SSDs, HDDs permit reduced file access rates. The CPU must wait for the HDD to return the inquired data file, saving its assets in the meanwhile.

The common I/O delay for HDD drives is approximately 7%.

6.Input/Output Request Times

Image

The bulk of Asheville Micro Services’s completely new machines moved to just SSD drives. Our personal tests have revealed that using an SSD, the common service time for an I/O request whilst operating a backup continues to be under 20 ms.

Image

Sticking with the same server, however this time equipped with HDDs, the results were different. The regular service time for an I/O query fluctuated in between 400 and 500 ms.

7. Backup Rates

Image

One more real–life development is the rate at which the data backup has been developed. With SSDs, a hosting server backup now requires no more than 6 hours implementing Asheville Micro Services’s hosting server–optimized software.

Image

We implemented HDDs exclusively for a few years and we have very good knowledge of exactly how an HDD functions. Creating a backup for a server equipped with HDD drives can take around 20 to 24 hours.

With Asheville Micro Services, you can find SSD–powered website hosting solutions at cheap prices. Our website hosting plans can include SSD drives automatically. Go in for an account here and experience the way your websites will become much better immediately.


  • Service guarantees

  •  
  • Each one of our Virtual Private Servers is put together for you without charge. 99.9% network uptime. Full root/administrator access.
  • Compare our prices

  •  
  • Conveniently review the parameters and tools offered by Asheville Micro Services’s Virtual Private Servers. Find which VPS Hosting setup offers you precisely what you need to manage your dynamic online presence easily.
  • Compare our hosting plans
  • Contact Us

  •  
  • Get in touch with us 24x7 by email or by utilizing our super–fast ticketing system. Our technicians are going to respond to any questions within 1 hour.